YOU ARE HERE:

M16 Signal Technical Info

 

Mechanical Data
Housing: Copper-Zinc Alloy, Die Casting & Aluminum Alloy
Housing Surface: Nickel Plated Brass, Other Surfaces Upon Request
Inserts (For Contacts): Thermoplastic Polyamid PA 6 (Nylon 6/6), PBT
Fire protection class V-0
Contacts: Brass Alloy
Contact Surface at point of Contact: Nickel and gold plated (0,25µm Au)
Minimum Mating Cycles: > 1000
Seals / O-Rings: Buna-N standard, optional FPM
Temperature Range:
 -40°F to 257°F (-40°C to 125°C)
Type of Contacts: Crimp, dip solder (PCB)
Protection: IP 67 / IP 69 K per EN 60529 (connected), NEMA 4x
Cable Diameter Range: .08 - .43" (2 - 11 mm)
 
Electrical Data
Number of Positions 3 (3x1) 3 (3x2) 4+3+PE (320V) 4+3+PE (630V)
Number of Contacts 3 3
4 4
4 4
Contact Ø (mm) 1 2
0.8 1.6
0.8 1.25
AWG [mm2] 0.14-1 0.5-2.5
0.08-0.34 0.34-1.5
0.08-0.34 0.34-1.5
Nominal Current [A] 8 20
5 16
5 16
Nominal Voltage2 [V~] Degree of Protection 32 400 630
160 320
300 630
Test Voltage (Breakdown Voltage) [V~] 2500 2500
1500 2500
1500 2500
Insulation Resistance [MΩ] > 1010 > 1010
> 1010
> 1010
Max. Contact Resistance [mΩ] 3 3 3 3              3

Electrical Data
Number of Positions 10 12+3 18
Number of Contacts 10
12 3
18
Contact Ø (mm) 1
0.8 1.25
0.8
AWG [mm2] 0.14-0.75
0.08-.34 0.5-1.5
0.08-0.34
Nominal Current [A] 8
3 10
3
Nominal Voltage [V~] Degree of Protection 2* 230
60 160
60
Nominal Voltage [V~] Degree of Protection 3* 160
24 60
24
Test Voltage (Breakdown Voltage) [V~] 1500
1500 2500
1500
Insulation Resistance [MΩ] > 106 > 1010 > 1010
Max. Contact Resistance [mΩ] 3
3 3
3
 
*Degree of Protection
Potential dirt accumulation of a disconnected connector in a certain environment.
*Degree of Protection 2
No permanent conductive dirt accumulation will occur. Temporary conductive dirt accumulation, such as condensation, is possible. Typical for households, offices, laboratories and test labs.
*Degree of Protection 3
Conductive, as well as dry non-conductive dirt accumulation can occur. It can be temporarily conductive due to condensation. Typical for industrial and factory environments.
 

Assembly Instructions PDF Download