YOU ARE HERE:

M40 Power Technical Information

Mechanical Data
Housing: Copper-Zinc Alloy, Die Casting & Aluminum
Housing Surface:
 Nickel Plated Brass, Other Surfaces Upon Request

Inserts (For Contacts):

Thermoplastic Polyamide PA 6 (Nylon 6/6), PBT
Fire protection class V-0
Contacts: Brass Alloy
Contact Surface at point of Contact:
 Nickel and gold plated (0,25µm Au)
Minimum Mating Cycles: > 1000
Seals / O-Rings: Buna-N standard, optional FPM)
Temperature Range: -40°F to 257°F (-40°C to 125°C)
Type of Contacts: Crimp
Protection: IP 67 / IP 69 K per EN 60529 (connected), NEMA 4x
Cable Diameter Range: .51 - 1.10" (13 - 28 mm)
 
Electrical Data
Number of Positions 3 + 2 + PE 4 + 3 + PE
Number of Contacts
2 4
4 4
Contact Ø (mm)
2 3.6
2 3.6
Nominal Current [A]
28 55
28 55
Nominal Voltage [V~] Degree of Protection 2
300 800
300 800
Nominal Voltage [V~] Degree of Protection 3
300 600
300 600
Test Voltage (Breakdown Voltage) [V~]
2500 4000
2500 4000
Insulation Resistance [MΩ] > 1013 > 1013
Max. Contact Resistance [mΩ]
3 1
3 1
 
*Degree of Protection
Potential dirt accumulation of a disconnected connector in a certain environment.
*Degree of Protection 2
No permanent conductive dirt accumulation will occur. Temporary conductive dirt accumulation, such as condensation, is possible. Typical for households, offices, laboratories and test labs.
*Degree of Protection 3
Conductive, as well as dry non-conductive dirt accumulation can occur. It can be temporarily conductive due to condensation. Typical for industrial and factory environments.
 

Assembly Instructions PDF Download